2013 Chevrolet Avalanche Owner Manual - Page 146
2013 Chevrolet Avalanche Manual
Page 146 highlights
5-20 Instruments and Controls vehicle. For normal braking performance, both circuits need to be working. If the warning light comes on and a chime sounds, there could be a brake problem. Have the brake system inspected right away. This light can also come on due to low brake fluid. See Brake Fluid on page 10‑23 for more information. This can happen if the 12-volt battery has recently been replaced or run down. The diagnostic system is designed to evaluate critical emission control systems during normal driving. This can take several days of routine driving. If this has been done and the vehicle still does not pass the inspection for lack of OBD II system readiness, your dealer can prepare the vehicle for inspection. { WARNING The brake system might not be working properly if the brake system warning light is on. Driving with the brake system warning light on can lead to a crash. If the light is still on after the vehicle has been pulled off the road and carefully stopped, have the vehicle towed for service. If the light comes on while driving, pull off the road and stop carefully. The pedal might be harder to push or might go closer to the floor. It can take longer to stop. If the light is still on, have the vehicle towed for service. See Towing the Vehicle on page 10‑83. Brake System Warning Light With the ignition on, the brake system warning light comes on when the parking brake is set. If the vehicle is driven with the parking brake engaged, a chime sounds when the vehicle speed is greater than 8 km/h (5 mph). The vehicle brake system consists of two hydraulic circuits. If one circuit is not working, the remaining circuit can still work to stop the Metric English This light comes on briefly when the ignition key is turned to ON/RUN. If it does not come on then, have it fixed so it is ready to warn if there is a problem.