2013 Chevrolet Camaro Owner Manual - Page 240

9-44 Driving and Operating SET/− (Set/Coast): Move the thumbwheel down to set a speed or to make the vehicle decelerate. Setting Cruise Control If 5 is on when not in use, it could get bumped and go into cruise when not desired. Keep the cruise control switch off when cruise is not being used. 1. Press 5 to turn cruise control on. Cruise Control With cruise control, the vehicle can maintain a speed of about 40 km/h (25 mph) or more without keeping your foot on the accelerator. Cruise control does not work at speeds below 40 km/h (25 mph). { WARNING Cruise control can be dangerous where you cannot drive safely at a steady speed. So, do not use the cruise control on winding roads or in heavy traffic. Cruise control can be dangerous on slippery roads. On such roads, fast changes in tire traction can cause excessive wheel slip, and you could lose control. Do not use cruise control on slippery roads. 5 (On/Off): Turns the cruise control system on and off. A white indicator light comes on in the instrument cluster. Press to disengage cruise control without erasing the set speed from memory. RES/+ (Resume/Accelerate): Move the thumbwheel up to make the vehicle resume to a previously set speed or to accelerate to a higher speed. 2. Get to the speed desired. 3. Press the thumbwheel toward SET/− and release it. 4. Take your foot off the accelerator pedal. When the cruise control has been set to the desired speed, a green cruise control indicator appears on the instrument cluster. When the brakes are applied, the cruise control shuts off. \ (Cancel):