2013 Chevrolet Camaro Owner Manual - Page 47

Keys, Doors, and Windows 6. Using the provided wrench, turn the pressure release bolt counterclockwise no more than one turn. 7. Reinstall the trim cover. 8. Pull the front of the convertible top up and forward. 2-21 10. Lock the convertible top front latch by pulling down and turning it counterclockwise, then push it up. When power is restored to the vehicle, the pressure release bolt must be tightened using the provided wrench, by turning it clockwise. The convertible top button can then be used to lower or raise the convertible top. If the convertible top is operated multiple times, the engine should be running to prevent drain on the vehicle's battery. Under certain conditions, the Driver Information Center (DIC) may display a message regarding the convertible top. See Convertible Top Messages on page 5‑34. 4. Remove the trim cover to access the hydraulic pressure release bolt. 5. Locate the pressure release bolt on the top of the hydraulic pump. 9. After the convertible top is completely raised, release the convertible top front latch from the lock position by pulling down and turning it clockwise. If the battery has been disconnected, the power windows must be programmed for the convertible top to operate. See Power Windows on page 2‑14.