2013 Chevrolet Camaro Owner Manual - Page 296

10-40 Vehicle Care To replace one of these bulbs: 1. Locate the bulb assembly under the front fascia. 2. Disconnect the electrical connector from the bulb assembly and pull out the bulb assembly. 3. Push in the new bulb assembly to lock it into place. 4. Reconnect the electrical connector to the bulb assembly. License Plate Lamp To replace one of these bulbs: Taillamps, Turn Signal, and Stoplamps To replace a taillamp, turn signal, or stoplamp bulb: 1. Open the trunk. See Trunk on page 2‑8. 2. Remove the close out panel retainers to gain access to the bulb socket connectors. 3. Turn the bulb socket counterclockwise to remove it. 4. Pull the old bulb straight out of the bulb socket. 5. Push the new bulb straight into the bulb socket until it clicks. 6. Turn the bulb socket clockwise to reinstall. 1. Unclip the license plate lamp from the fascia opening. 2. Pull the license plate lamp down through the fascia opening. 3. Turn the bulb socket counterclockwise and pull the bulb straight out of the lamp socket. 4. Install the new bulb.