2013 Chevrolet Camaro Owner Manual - Page 334

10-78 Vehicle Care Removal and Installation of the Sealant Canister To remove the sealant canister: 6. Screw the connector (2) to the canister (1). 7. Slide the plastic cover back on. 11. Press the on/off button (1) to turn the tire sealant and compressor kit off. Be careful while handling the tire sealant and compressor kit as it could be warm after usage. 12. Unplug the power plug (7) from the accessory power outlet in the vehicle. 13. Disconnect the air only hose (5) from the tire valve stem, by turning it counterclockwise, and replace the tire valve stem cap. 14. Return the air only hose (5) and the power plug (7) back to their original locations. 15. Return the equipment to its original storage location in the vehicle. Storing the Tire Sealant and Compressor Kit 1. Remove the plastic cover. 2. Unscrew the connector (2) from the canister (1). 3. Pull up on the canister (1) to remove it. 4. Replace with a new canister which is available from your dealer. 5. Push the new canister into place. The tire sealant and compressor kit is in a foam container in the trunk. 1. Open the trunk. See Trunk on page 2‑8. 2. Remove the carpet.