2013 Chevrolet Camaro Owner Manual - Page 283

Vehicle Care 10-27 5. With the engine idling, top off the coolant through the radiator cap opening until full. Wait 30 seconds for the coolant to settle and top off, if the level drops. 2. Cover the radiator cap with a thick cloth and turn it slowly counterclockwise and remove. 3. If there is no coolant visible or the level is low, slowly fill the system through the radiator cap opening with a 50/50 mixture of clean, drinkable water and DEX-COOL coolant until full. Wait 30 seconds for coolant to settle and top off if the level drops. Do not spill coolant on the accessory drive belts. If a spill occurs, rinse the belt with fresh water. 4. Start the engine. 8. Check the coolant level in the engine coolant recovery bottle and fill it until the level is at the top mark on the dipstick. 6. Once the system is full, put the radiator cap back on by turning clockwise. 7. Turn the engine off. 13. Check the coolant level in the engine coolant recovery bottle and fill it until the level is at the top symbol on the dipstick. 6.2L V8 Engine Fill Procedure 1. Locate the radiator cap. See Engine Compartment Overview on page 10‑6.