2013 Chevrolet Malibu Owner Manual - Page 100

3-50 Seats and Restraints If the head restraint interferes with the proper installation of the child restraint, the head restraint may be removed. See "Head Restraint Removal and Reinstallation" at the end of this section. 2.2. Route, attach, and tighten the top tether according to the child restraint instructions and the following instructions: 1.3. Attach and tighten the lower attachments on the child restraint to the lower anchors. 2. If the child restraint manufacturer recommends that the top tether be attached, attach and tighten the top tether to the top tether anchor, if equipped. Refer to the child restraint instructions and the following steps: 2.1. Find the top tether anchor. Open the cover to expose the anchor. . If the position you are using does not have a headrest or head restraint and you are using a dual tether, route the tether over the seatback. . If the position you are using does not have a headrest or head restraint and you are using a single tether, route the tether over the seatback.