2013 Chevrolet Malibu Owner Manual - Page 293
2013 Chevrolet Malibu Manual
Page 293 highlights
Vehicle Care Low-Beam Headlamp 1. For the driver side bulb, remove the windshield washer bottle filler neck by firmly pulling it straight up and out of the bottle. 2. Remove the cap from the back of the headlamp assembly by turning it counterclockwise. 3. Disconnect the electrical connector. 4. Remove the bulb from the lamp assembly by turning counterclockwise. 5. Install a new bulb in the lamp assembly. 6. Connect the electrical connector. 7. Replace the cap from the back of the headlamp assembly by turning it clockwise. 8. For the driver side, reinstall the windshield washer bottle filler neck by firmly pushing it straight into the bottle. Ensure that the filler neck clip engages into the underhood electrical center retainer. 10-27 3. Remove the bulb from the socket. 4. Replace the bulb in the bulb socket. 5. Install the bulb socket in the headlamp assembly by turning it clockwise. 6. For the driver side, reinstall the windshield washer bottle filler neck by firmly pushing it straight into the bottle. Ensure that the filler neck clip engages into the underhood electrical center retainer. Front Turn Signal, Parking, and Sidemarker Lamp To replace one of these lamps: 1. For the driver side bulb, remove the windshield washer bottle filler neck by firmly pulling it straight up and out of the bottle. 2. Remove the bulb socket from the headlamp assembly by turning it counterclockwise.