2014 Chevrolet Camaro Owner Manual - Page 240

9-44 Driving and Operating If the StabiliTrak® system begins to limit wheel spin while using cruise control, the cruise control automatically disengages. See Traction Control/Electronic Stability Control on page 9-37. When road conditions allow the cruise control to be safely used, you can apply the cruise control again. Cruise Control With cruise control, the vehicle can maintain a speed of about 40 km/h (25 mph) or more without keeping your foot on the accelerator. Cruise control does not work at speeds below 40 km/h (25 mph). When the brakes are applied, the cruise control is disengaged. * (Cancel): Press to disengage cruise control without erasing the set speed from memory. RES/+ (Resume/Accelerate): Move the thumbwheel up briefly to make the vehicle resume to a previously set speed or hold to accelerate. If cruise control is already active, use to increase vehicle speed. SET/− (Set/Coast): Move the thumbwheel down briefly to set the speed and activate cruise control. If cruise control is already active, use to decrease speed. Setting Cruise Control { Warning Cruise control can be dangerous where you cannot drive safely at a steady speed. Do not use the cruise control on winding roads or in heavy traffic. Cruise control can be dangerous on slippery roads. On such roads, fast changes in tire traction can cause excessive wheel slip, and you could lose control. Do not use cruise control on slippery roads. 1 (On/Off): Turns the cruise control system on and off. A white indicator light comes on in the instrument cluster when cruise control is on. If 1 is on when not in use, it could get bumped and go into cruise when not desired. Keep the cruise control switch off when cruise is not being used. 1. Press 1 to turn cruise control on. 2. Get to the speed desired.