2014 Chevrolet Camaro Owner Manual - Page 334

10-78 Vehicle Care 1. Remove the compressor from its storage location. See Storing the Tire Sealant and Compressor Kit on page 10-79. 2. Remove the air only hose (10) and the power plug (9) from the bottom of the compressor. 3. Place the compressor on the ground near the flat tire. Make sure the tire valve stem is positioned close to the ground so the hose will reach it. 6. Plug the power plug (9) into the accessory power outlet in the vehicle. Unplug all items from other accessory power outlets. See Power Outlets on page 5-5. If the vehicle has an accessory power outlet, do not use the cigarette lighter. If the vehicle only has a cigarette lighter, use the cigarette lighter. Do not pinch the power plug cord in the door or window. 7. Start the vehicle. The vehicle must be running while using the air compressor. 8. Press the on/off button (5) to turn the tire sealant and compressor kit on. The compressor will inflate the tire with air only. 8. Pressure Gauge 9. Power Plug 10. Air Only Hose If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard warning flashers. See Hazard Warning Flashers on page 6-4. See If a Tire Goes Flat on page 10-70 for other important safety warnings. 4. Remove the valve stem cap from the flat tire by turning it counterclockwise. 5. Attach the air only hose (10) to the tire valve stem by turning it clockwise until tight.