2014 Chevrolet Traverse Owner Manual - Page 289

Driving and Operating Leaving After Parking on a Hill 1. Apply and hold the brake pedal while you: ... 9-51 Check periodically to see that all hitch nuts and bolts are tight. Start the engine. Shift into a gear. Release the parking brake. Engine Cooling When Trailer Towing The cooling system may temporarily overheat during severe operating conditions. See Engine Overheating on page 10-16. must be considered. See "Weight of the Trailer Tongue" later in this section for more information. Maximum trailer weight is calculated assuming only the driver is in the tow vehicle and it has all the required trailering equipment. The weight of additional optional equipment, passengers and cargo in the tow vehicle must be subtracted from the maximum trailer weight. Use the following chart to determine how much the vehicle can weigh, based upon the vehicle model and options. 2. Let up on the brake pedal. 3. Drive slowly until the trailer is clear of the chocks. 4. Stop and have someone pick up and store the chocks. Trailer Towing Three important considerations have to do with weight: ... Maintenance When Trailer Towing The vehicle needs service more often when pulling a trailer. See the Maintenance Schedule on page 11-2. Things that are especially important in trailer operation are automatic transmission fluid, engine oil, axle lubricant, belts, cooling system and brake system. Inspect these before and during the trip. The weight of the trailer. The weight of the trailer tongue. The total weight on the vehicle's tires. Weight of the Trailer How heavy can a trailer safely be? Speed, altitude, road grades, outside temperature, special equipment, and the amount of tongue weight the vehicle can carry