2014 Chevrolet Traverse Owner Manual - Page 322

10-28 Vehicle Care 8. Push on the lamp side opposite the clip until the lamp assembly snaps into place. Electrical System High Voltage Devices and Wiring Replacement Bulbs Exterior Lamp License Plate Lamp Rear Turn Signal Lamp 4. Turn the bulb socket (1) counterclockwise to remove it from the lamp assembly (3). 5. Pull the bulb (2) straight out of the bulb socket. 6. Push the replacement bulb straight into the bulb socket and turn the bulb socket clockwise to install it into the lamp assembly. 7. Turn the lamp assembly into the liftgate engaging the clip side first. Taillamp/Stop Lamp Bulb Number 194 LL 7443 NA 7444 LL { Warning Exposure to high voltage can cause shock, burns, and even death. The high voltage components in the vehicle can only be serviced by technicians with special training. High voltage components are identified by labels. Do not remove, open, take apart, or modify these components. High voltage cable or wiring has orange covering. Do not probe, tamper with, cut, or modify high voltage cable or wiring. For replacement bulbs not listed here, contact your dealer.