2014 Chevrolet Traverse Owner Manual - Page 61
2014 Chevrolet Traverse Manual
Page 61 highlights
Seats and Restraints 2. Press and hold "1" until two beeps sound. 3. Repeat for a second driver position using "2." To recall, press and release "1" or "2." The vehicle must be in P (Park). A single beep will sound. The seat and outside mirrors will move to the position previously stored for the identified driver. Memory Remote Recall The memory feature can recall the driver seat and outside mirrors to stored positions when entering the vehicle. To activate, unlock the driver door with the Remote Keyless Entry (RKE) transmitter. The driver seat and outside mirrors will move to the memory position associated with the transmitter used to unlock the vehicle. This feature is turned on or off using the vehicle personalization menu. See Vehicle Personalization (With DIC Buttons) on page 5-43. To stop recall movement, press one of the power seat controls, memory buttons, or the power mirror buttons. If something has blocked the driver seat while recalling a memory position, the recall may stop. Remove the obstruction; then press and hold the appropriate manual control for the memory item that is not recalling for two seconds. Try recalling the memory position again by pressing the appropriate memory button. If the memory position is still not recalling, see your dealer for service. Easy Exit Driver Seat This feature can move the seat rearward to allow extra room to exit the vehicle. 3-7 S (Easy Exit Driver Seat): Press to activate the recall. The vehicle must be in P (Park). If this feature is programmed on in the vehicle personalization menu, automatic seat movement occurs when the ignition key is removed. A single beep sounds. The driver seat moves back approximately 8 cm (3 in). To move the seat back farther, press S again until the seat is all the way back. If something has blocked the driver seat while recalling the exit position, the recall may stop. Remove the obstruction; then press and hold the power seat control rearward for two seconds. Try recalling the exit position again. If the exit position is still not recalling, see your dealer for service. See Vehicle Personalization (With DIC Buttons) on page 5-43.