2014 Chevrolet Traverse Owner Manual - Page 43

Keys, Doors, and Windows If more obstacles are encountered on the same power cycle, the power function deactivates. The liftgate must be opened or closed manually if this occurs. A message displays on the Driver Information Center (DIC) to indicate that the liftgate is open. See Door Ajar Messages on page 5-34. After removing the obstacles, manually open the liftgate fully or close and latch the liftgate. The liftgate will resume normal power operation. The vehicle also has pinch sensors along the side edges of the liftgate. If the sensors press against an object while closing, the liftgate will reverse direction and open fully. The liftgate will remain open until it is activated again or closed manually. Do not force the liftgate open or closed during a power cycle. 2-11 Manual Operation of Power Liftgate Press the touch pad on the outside of the liftgate pull cup and lift to open. Use the pull cup to lower and close the liftgate. The liftgate latch will power close. Always close the liftgate before driving. If 8 on the RKE transmitter or l on the liftgate is pressed while in manual operation mode, the taillamps will flash three times, but the liftgate will not move. It is not recommended to drive with the liftgate open. However, if the vehicle must be driven with the liftgate open, the liftgate should be set to manual operation. To change the liftgate to manual operation, press OFF on the power liftgate switch. A message displays on the DIC indicating manual operation mode. See Door Ajar Messages on page 5-34. With the liftgate in manual mode and all of the doors unlocked, the liftgate can be manually opened and closed.