2014 Chevrolet Traverse Owner Manual - Page 319

Vehicle Care . 10-25 To check the P (Park) mechanism's holding ability: With the engine running, shift to P (Park). Then release the parking brake followed by the regular brake. To replace the wiper blade assembly: 1. Pull the windshield wiper assembly away from the windshield. 3. Install the new blade onto the arm connector and make sure the tabs are fully set in the locked position. Allowing the wiper blade arm to touch the windshield when no wiper blade is installed could damage the windshield. Any damage that occurs would not be covered by your warranty. Do not allow the wiper blade arm to touch the windshield. 4. Repeat the steps for the other blade. Contact your dealer if service is required. Wiper Blade Replacement Front Wiper Blade Windshield wiper blades should be inspected for wear or cracking. See Maintenance Schedule on page 11-2. Replacement blades come in different types and are removed in different ways. For the proper type and size, see Maintenance Replacement Parts on page 11-13. 2. Squeeze the tabs on each side of the wiper blade assembly and slide the assembly off the end of the wiper arm. Rear Wiper Blade To replace the rear wiper blade: 1. Pull the wiper blade assembly away from the backglass. The rear wiper blade will not lock in a vertical position so care should be used when pulling it away from the vehicle.