2014 Chevrolet Traverse Owner Manual - Page 321

Vehicle Care To replace one of these bulbs: 1. Open the liftgate. See Liftgate on page 2-8. 2. Remove the convenience net, if the vehicle has one. 6. Turn the bulb socket counterclockwise and pull it straight out to remove it from the taillamp assembly. 7. Pull the old bulb straight out of the bulb socket. 8. Push the new bulb straight into the bulb socket. 9. Push the taillamp assembly back into its original location. When reinstalling the taillamp assembly, make sure the pin on the taillamp assembly lines up and is inserted correctly into the opening of the vehicle. 10. Reinstall the two screws that hold the taillamp assembly in place. 11. Reinstall the two taillamp screw covers. 10-27 License Plate Lamp To replace one of these bulbs: 1. Open the liftgate. See Liftgate on page 2-8. 3. Remove the two taillamp screw covers. 4. Remove the two screws holding the taillamp assembly in place. 5. Pull out the taillamp assembly. 2. Push the left end of the lamp assembly toward the right. 3. Turn the lamp assembly down to remove it from the liftgate.