2013 Chrysler 200 Owner Manual - Page 214

212 UNDERSTANDING YOUR INSTRUMENT PANEL After the bulb check or when driving, if the driver seat 10. Engine Temperature Warning Light belt remains unbuckled, the Seat Belt Warning Light will This light warns of an overheated engine condiflash or remain on continuously. Refer to "Occupant tion. As engine coolant temperatures rise and the Restraints" in "Things To Know Before Starting Your gauge approaches H, this indicator will illuminate and a Vehicle" for further information. single chime will sound after reaching a set threshold. 9. Oil Pressure Warning Light Further overheating will cause the temperature gauge to pass H, and a continuous chime will occur until the This light indicates low engine oil pressure. The engine is allowed to cool or the 4 minutes duration is light will come on and remain on when the ignition expired, whichever come first. switch is turned from the OFF to the ON/RUN position, and the light will turn off after the engine is started. If the If the light turns on while driving, safely pull over bulb does not come on during starting, have the system and stop the vehicle. If the A/C system is on, turn it off. Also, shift the transmission into NEUTRAL and idle the checked by an authorized dealer. vehicle. If the temperature reading does not return to If the light comes on and remains on while driving, stop normal, turn the engine off immediately and call for the vehicle and shut off the engine. DO NOT OPERATE service. Refer to "If Your Engine Overheats" in "What To THE VEHICLE UNTIL THE CAUSE IS CORRECTED. Do In Emergencies" for further information. The light does not show the quantity of oil in the engine. This can be determined using the procedure shown in "Maintaining Your Vehicle".