2013 Chrysler 200 Owner Manual - Page 223

UNDERSTANDING YOUR INSTRUMENT PANEL 221 alternate tires or wheels on the vehicle that prevent the 26. Malfunction Indicator Light (MIL) TPMS from functioning properly. Always check the The Malfunction Indicator Light (MIL) is part of TPMS malfunction telltale after replacing one or more an onboard diagnostic system called OBD that tires or wheels on your vehicle, to ensure that the monitors emissions, engine, and automatic transreplacement or alternate tires and wheels allow the TPMS mission control systems. The light will illuminate when to continue to function properly. the key is in the ON/RUN position before engine start. If the bulb does not come on when turning the key from CAUTION! LOCK to ON/RUN, have the condition checked promptly. The TPMS has been optimized for the original Certain conditions, such as a loose or missing gas cap, equipment tires and wheels. TPMS pressures and poor fuel quality, etc., may illuminate the light after warning have been established for the tire size engine start. The vehicle should be serviced if the light equipped on your vehicle. Undesirable system operation or sensor damage may result when using re- stays on through several of your typical driving cycles. In placement equipment that is not of the same size, most situations, the vehicle will drive normally and will type, and/or style. Aftermarket wheels can cause not require towing. sensor damage. Do not use tire sealant from a can or balance beads if your vehicle is equipped with a TPMS, as damage to the sensors may result. 4