2013 Chrysler 200 Owner Manual - Page 280

278 UNDERSTANDING YOUR INSTRUMENT PANEL 72°F (22°C) is the recommended setting for maximum 1. Turn the Mode Control knob (on the right) and the comfort for the average person; however, this may vary. Blower Control knob (on the left) to AUTO NOTE: NOTE: The AUTO position performs best for front seat • The temperature setting can be adjusted at anytime occupants only. without affecting automatic operation. Operation of the system is quite simple. 2. Dial in the temperature you would like the system to • Pressing the Air Conditioning Control button while in maintain by rotating the Temperature Control knob. AUTO mode will cause the LED in the control button Once the comfort level is selected, the system will to flash three times and then turn off. This indicates maintain that level automatically using the heating that the system is in AUTO mode and requesting the system. Should the desired comfort level require air air conditioning is not necessary. conditioning, the system will automatically make the adjustment. • If your air conditioning performance seems lower than expected, check the front of the A/C condenser located You will experience the greatest effiin front of the radiator for an accumulation of dirt or ciency by simply allowing the system insects. Clean with a gentle water spray from behind to function automatically. Selecting the the radiator and through the condenser. Fabric front "O" (OFF) position on the blower confascia protectors may reduce airflow to the condenser, trol stops the system completely and reducing air conditioning performance. closes the outside air intake.