2013 Chrysler 200 Owner Manual - Page 26

24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If there is no key in the ignition switch, pressing • For vehicles not equipped with the EVIC, perform the the LOCK button on the RKE transmitter while you are following procedure: inside the vehicle will activate the Vehicle Security Alarm 1. Press and hold the UNLOCK button on a programmed system. Opening a door with the system activated will RKE transmitter for at least 4 seconds, but not longer cause the alarm to sound. Press the UNLOCK button to than 10 seconds. Then, press and hold the LOCK deactivate the Vehicle Security Alarm system. button while still holding the UNLOCK button. Flash Lights With Lock 2. Release both buttons at the same time. The feature will cause the turn signal lights to flash when the doors are locked or unlocked with the RKE transmit- 3. Test the feature while outside of the vehicle by pressing the LOCK/UNLOCK buttons on the RKE transter. This feature can be turned on or turned off. To change mitter with the ignition in the LOCK position and the the current setting, proceed as follows: key removed. • For vehicles equipped with the Electronic Vehicle Information Center (EVIC), refer to "Electronic Vehicle In- 4. Repeat these steps if you want to return this feature to its previous setting. formation Center (EVIC)/Personal Settings (CustomerProgrammable Features)" in "Understanding Your Instrument Panel" for further information.