2013 Chrysler 300 Owner Manual SRT - Page 195

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 NOTE: To program your RKE transmitters, perform the following: • Memory profiles can be set without the vehicle in 1. Remove the Key Fob from the ignition (or change the ignition to OFF, for vehicles equipped with Keyless PARK, but the vehicle must be in PARK to recall a Enter-N-Go). memory profile. • The Recall Memory with Remote Key Unlock feature 2. Select desired memory profile (1) or (2). The system will recall any stored settings for this profile. Wait for can be enabled through the Uconnect® System, refer to the system to complete the memory recall before "Uconnect® Settings" in "Understanding Your Instrucontinuing to Step 3. ment Panel" for further information. 3. Once the profile has been recalled, press and release the SET (S) button on the memory switch, then press and release button (1) or (2) accordingly. "Memory Your RKE transmitters can be programmed to recall one Profile Set" (1 or 2) will display in the instrument of two pre-programmed memory profiles by pressing the cluster on vehicles equipped with the EVIC. UNLOCK button on the RKE transmitter. Linking And Unlinking The Remote Keyless Entry Transmitter To Memory 4. Press and release the LOCK button on the RKE transmitter within 10 seconds. 3