2013 Chrysler 300 Owner Manual SRT - Page 523

MAINTAINING YOUR VEHICLE 521 CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. Rear Backup Lamp And Turn Signal Lamps 1. Open the trunk. 5. Pull the tail lamp assembly away from the vehicle enough to access the electrical connector. 6. Push the electrical connector locking tab to the side. 7. Disconnect the electrical connector. 8. Continue removing lamp from vehicle in order to access the bulb(s). 9. Turn the appropriate bulb and socket assembly counterclockwise to remove it from the tail lamp assembly. 2. Remove the trunk trim by removing the grocery hook (using a T-20 torque driver or similar tool), remove the 10. Disconnect the bulb from the socket assembly and install the replacement bulb. fastener, and pull back the weather strip. 3. Pull back the trunk liner to gain access to the tail lamp 11. Reinstall the bulb and socket assembly into the tail lamp assembly, and then turn it clockwise. wing nuts. 4. Remove the three wing nuts from the back of the tail lamp assembly. 7