2013 Chrysler 300 Owner Manual SRT - Page 202

200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To activate the delay feature, place the ignition in the OFF position while the headlights are still on. Then, turn off the headlights within 45 seconds. The delay interval begins when the headlight switch is turned off. SmartBeam - If Equipped The SmartBeam system provides increased forward lighting at night by automating high beam control through the use of a digital camera mounted on the inside If you turn the headlights or parking lights on, or place rearview mirror. This camera detects vehicle specific light the ignition in ACC or RUN, the system will cancel the and automatically switches from high beams to low beams until the approaching vehicle is out of view. delay. If you turn the headlights off before the ignition, they will NOTE: turn off in the normal manner. • SmartBeam can be turned on or off using the Uconnect® NOTE: System, refer to "Uconnect® Settings" in "Understanding Your Instrument Panel" for further information. • The lights must be turned off within 45 seconds of placing the ignition in the OFF position to activate this • Broken, muddy, or obstructed headlights and taillights feature. of vehicles in the field of view will cause headlights to remain on longer (closer to the vehicle). Also, dirt, film, • The headlight delay time is programmable using the and other obstructions on the windshield or camera Uconnect® System, refer to "Uconnect® Settings" in lens will cause the system to function improperly. "Understanding Your Instrument Panel" for further information.