2013 Chrysler 300 Owner Manual SRT - Page 465

WHAT TO DO IN EMERGENCIES 463 5. Replace the Sealant Bottle (1) and Sealant Hose (6) 4. Clean any remaining sealant from the TIREFIT housing. assembly at your authorized dealer as soon as possible. Refer to "(F) Sealant Bottle and Hose Replacement." 5. Position the new Sealant Bottle (1) in the housing so that the Sealant Hose (6) aligns with the hose slot in NOTE: When having the tire serviced, advise the authothe front of the housing. Press the bottle into the rized dealer or service center that the tire has been sealed housing. An audible click will be heard indicating the using the TIREFIT service kit. bottle is locked into place. (F) Sealant Bottle And Hose Replacement: 6. Verify that the cap is installed on the fitting at the end 1. Uncoil the Sealant Hose (6) (clear in color). of the Sealant Hose (6) and return the hose to its 2. Locate the round Sealant Bottle release button in the storage area (located on the bottom of the air pump). recessed area under the sealant bottle. 7. Return the TIREFIT kit to its storage location in the 3. Press the Sealant Bottle release button. The Sealant vehicle. Bottle (1) will pop up. Remove the bottle and dispose of it accordingly. 6