2013 Chrysler 300 Owner Manual SRT - Page 464

462 WHAT TO DO IN EMERGENCIES (E) After Driving: If the tire pressure is 19 psi (1.3 Bar) or higher: Pull over to a safe location. Refer to "Whenever You Stop 1. Press the Power Button (4) to turn on TIREFIT and to Use TIREFIT" before continuing. inflate the tire to the pressure indicated on the tire and loading information label on the driver-side door 1. Turn the Mode Select Knob (5) to the Air Mode opening. position. NOTE: If the tire becomes over-inflated, press the Defla2. Uncoil the power plug and insert the plug into the tion Button to reduce the tire pressure to the recomvehicle's 12 Volt power outlet. mended inflation pressure before continuing. 3. Uncoil the Air Pump Hose (7) (black in color) and 2. Disconnect the TIREFIT kit from the valve stem, screw the fitting at the end of hose (7) onto the valve reinstall the cap on the valve stem and unplug from stem. 12 Volt outlet. 4. Check the pressure in the tire by reading the Pressure 3. Place the TIREFIT kit in its proper storage area in the Gauge (3). vehicle. If tire pressure is less than 19 psi (1.3 Bar), the tire is too 4. Have the tire inspected and repaired or replaced at the badly damaged. Do not attempt to drive the vehicle earliest opportunity at an authorized dealer or tire further. Call for assistance. service center.