2010 Dodge Challenger Owner Manual SRT8 - Page 169

168 UNDERSTANDING YOUR INSTRUMENT PANEL the BAS system. If this light remains on after several Do not operate the vehicle until the cause is corrected. ignition cycles, and the vehicle has been driven several This light does not indicate how much oil is in the engine. miles (kilometers) at speeds greater than 30 mph The engine oil level must be checked under the hood. (48 km/h), see an authorized dealer as soon as possible. 15. High Beam Indicator This indicator will turn on when the high beam WARNING! headlights are on. Push the multifunction lever If the warning light remains on, the system may not away from the steering wheel to switch the headlights to be working and you will not have the benefit of ESP high beam. or BAS. You should adjust your speed and stopping 16. Seat Belt Reminder Light distance to account for this lack of the feature or you This light will turn on for four to eight seconds as could be in an accident and be seriously injured. You a bulb check when the ignition switch is first should take your vehicle to an authorized dealer. placed in ON/RUN. A chime will sound if the driver's seat belt is unbuckled during the bulb check. The 14. Oil Pressure Warning Light Seat Belt Reminder Light will flash or remain on continuThis light indicates low engine oil pressure. The ously if the driver's seat belt remains unbuckled after the light should turn on momentarily when the engine bulb check or when driving. Refer to "Occupant Reis started. If the light turns on while driving, stop the straints" in "Things To Know Before Starting Your Vevehicle and shut off the engine as soon as possible. A chime hicle" for further information. will sound for four minutes when this light turns on.