2010 Dodge Challenger Owner Manual SRT8 - Page 174

UNDERSTANDING YOUR INSTRUMENT PANEL 173 tires or wheels on your vehicle, to ensure that the 23. Anti-Lock Brake (ABS) Light This light monitors the Anti-Lock Brake System replacement or alternate tires and wheels allow the TPMS (ABS). The light will turn on when the ignition to continue to function properly. switch is placed in the ON/RUN position and CAUTION! may stay on for as long as four seconds. The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause sensor damage. Do not use tire sealant from a can, or balance beads if your vehicle is equipped with a TPMS, as damage to the sensors may result. If the ABS light remains on or turns on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is required. However, the conventional brake system will continue to operate normally if the BRAKE warning light is not on. If the ABS light is on, the brake system should be serviced as soon as possible to restore the benefits of Anti-Lock brakes. If the ABS light does not turn on when the ignition switch is placed in the ON/RUN position, have the light inspected by an authorized dealer. 4