2010 Dodge Challenger Owner Manual SRT8 - Page 180

UNDERSTANDING YOUR INSTRUMENT PANEL 179 Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN position. To turn off the message temporarily, press and release the MENU button. To reset the oil change indicator system (after performing the scheduled maintenance) refer to the following procedure. • Average Fuel Economy • Distance To Empty • Trip A • Trip B • Elapsed Time 1. Turn the ignition switch to the ON position (Do not • Display Units of Measure in start the engine). 2. Fully depress the accelerator pedal, slowly, three times Press the SCROLL button to cycle through all the Trip Computer functions. within 10 seconds. 3. Turn the ignition switch to the OFF/LOCK position. The Trip Functions mode displays the following. 4 NOTE: If the indicator message illuminates when you Average Fuel Economy start the vehicle, the oil change indicator system did not Shows the average fuel economy since the last reset. When the fuel economy is reset, the display will read reset. If necessary, repeat this procedure. "RESET" or show dashes for two seconds. Then, the Trip Functions Press and release the MENU button until one of the following Trip Functions displays in the EVIC: