2010 Dodge Challenger Owner Manual SRT8 - Page 44

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 the shoulder belt. The Automatic Locking Mode is availLap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ able on all passenger-seating positions with a combination lap/shoulder belt. shoulder belt. 1. Position the latch plate as close as possible to the When To Use The Automatic Locking Mode Use the Automatic Locking Mode anytime a child safety anchor point. seat is installed in a seating position that has a belt with 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, this feature. Children 12 years old and under should grasp and twist the belt webbing 180 degrees to create a always be properly restrained in the rear seat. fold that begins immediately above the latch plate. How To Engage The Automatic Locking Mode 3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of the 1. Buckle the combination lap and shoulder belt. latch plate. 2. Grasp the shoulder portion and pull downward until 4. Continue to slide the latch plate up until it clears the the entire belt is extracted. folded webbing. 3. Allow the belt to retract. As the belt retracts, you will Automatic Locking Retractors (ALR) Mode - If hear a clicking sound. This indicates the safety belt is Equipped now in the Automatic Locking Mode. In this mode, the shoulder belt is automatically prelocked. The belt will still retract to remove any slack in 2