2010 Dodge Challenger Owner Manual SRT8 - Page 23

22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Remote Key Unlock, Driver Door/All Doors First This feature lets you program the system to unlock either the driver's door or both doors on the first press of the UNLOCK button on the RKE transmitter. Refer to "Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)" in "Understanding Your Instrument Panel" for further information. 3. Test the feature while outside of the vehicle by pressing the LOCK/UNLOCK buttons on the RKE transmitter with the ignition switch in the OFF position and the Key Fob removed. 4. Repeat these steps if you want to return this feature to its previous setting. NOTE: Pressing the LOCK button on the RKE transmit• When not using the EVIC, perform the following ter while you are inside the vehicle will activate the steps: Security Alarm. Opening a door with the Security Alarm 1. Press and hold the LOCK button on a programmed activated will cause the alarm to sound. Press the UNRKE transmitter for at least 4 seconds, but no longer than LOCK button to deactivate the Security Alarm. 10 seconds. Then, press and hold the UNLOCK button Flash Lights with Remote Key Lock while still holding the LOCK button. This feature will cause the turn signal lights to flash when the doors are locked or unlocked with the RKE transmit2. Release both buttons at the same time. ter. This feature can be turned on or turned off. Refer to "Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)" in "Understanding Your Instrument Panel" for further information.