2013 Dodge Dart Owner Manual - Page 121

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 Voice Command Button Operation Voice commands can be used to operate the Uconnect௡ When you press the Voice Command button you will hear a BEEP. The beep is your Phone and to navigate through the Uconnect௡ Phone signal to give a command. menu structure. Voice commands are required after most Uconnect௡ Phone prompts. You will be prompted for a The Uconnect௡ Phone can be used with any Hands-Free specific command and then guided through the available Profile certified Bluetooth௡ mobile phone. See the options. Uconnect௡ website for supported phones. Refer to your • Prior to giving a voice command, one must wait for mobile service provider or the phone manufacturer for the beep. details. • For certain operations, compound commands can be The Uconnect௡ Phone is fully integrated with the vehiused. For example, instead of saying "Setup", "Device cle's audio system. The volume of the Uconnect௡ Phone Pairing" and then "Pair a Device", the following can be adjusted either from the radio volume control compound command can be said: "Setup", "Device knob or from the steering wheel radio control (right Pairing" and "Pair a Bluetooth௡ Device". switch), if so equipped. • For each feature explanation in this section, only the The radio display will be used for visual prompts from compound form of the voice command is given. You the Uconnect௡ Phone such as "Phone" or caller ID. can also break the commands into parts and say each part of the command when you are asked for it. For 3