2013 Dodge Dart Owner Manual - Page 457

STARTING AND OPERATING 455 the graphic display of the pressure value(s) will stop flashing or return to their normal color, and the Tire Pressure Monitoring Light will extinguish once the updated tire pressure(s) have been received. The vehicle may need to be driven for up to 20 minutes above 15 mph (24 km/h) to receive this information. Service TPMS Message The Tire Pressure Monitoring Telltale Light will flash on and off for 75 seconds, and then remain on solid when a system fault is detected. The system fault will also sound a chime. The EVIC will display a "SERVICE TPM SYSTEM" message for a minimum of five seconds. This text message is then followed by a graphic display, with "- -" in place of the pressure value(s) indicating which Tire Pressure Monitoring Sensor(s) is not being received. Light will no longer flash, the ЉSERVICE TPM SYSTEMЉ message will not be present, and a pressure value will be displayed instead of dashes. A system fault can occur with any of the following scenarios: 1. Jamming due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPM sensors. 2. Installing some form of aftermarket window tinting that affects radio wave signals. 3. Snow or ice around the wheels or wheel housings. 4. Using tire chains on the vehicle. 5. Using wheels/tires not equipped with TPM sensors. 5 The EVIC will also display a "SERVICE TPM SYSTEM" If the ignition key is cycled, this sequence will repeat, message for a minimum of five seconds and the Tire providing the system fault still exists. If the system fault Pressure Monitoring Telltale Light will flash on and off no longer exists, the Tire Pressure Monitoring Telltale for 75 seconds, and then remain on solid when a system