2013 Dodge Dart Owner Manual - Page 535

MAINTAINING YOUR VEHICLE 533 wear. Prior to the application of any lubricant, the parts concerned should be wiped clean to remove dust and grit; after lubricating excess oil and grease should be removed. Particular attention should also be given to hood latching components to ensure proper function. When performing other underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated. mild, nonabrasive cleaner or use the washer solvent. This will remove accumulations of salt, waxes or road film and help reduce streaking and smearing. Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield. Avoid using the wiper blades to remove frost or ice from the windshield. Make sure that The external lock cylinders should be lubricated twice a they are not frozen to the glass before turning them on to year, preferably in the Fall and Spring. Apply a small avoid damaging the blade. Keep the blade rubber out of amount of a high quality lubricant, such as MOPAR௡ contact with petroleum products such as engine oil, Lock Cylinder Lubricant or equivalent directly into the gasoline, etc. lock cylinder. NOTE: Life expectancy of wiper blades varies depending on geographical area and frequency of use. Poor Windshield Wiper Blades Clean the rubber edges of the wiper blades and the performance of blades may be present with chattering, windshield periodically with a sponge or soft cloth and a marks, water lines or wet spots. If any of these conditions are present, clean the wiper blades or replace as necessary. 7