2013 Dodge Dart Owner Manual - Page 502

500 WHAT TO DO IN EMERGENCIES Sealing A Tire With TIREFIT (A) Whenever You Stop To Use TIREFIT: (B) Setting Up To Use TIREFIT: 1. Turn the Mode Select Knob (5) to the Sealant Mode position. 1. Pull over to a safe location and turn on the vehicle's Hazard Warning flashers. 2. Uncoil the Sealant Hose (6) and then remove the cap from the fitting at the end of the hose. 2. Verify that the valve stem (on the wheel with the deflated tire) is in a position that is near to the ground. 3. Place the TIREFIT kit flat on the ground next to the This will allow the TIREFIT Hoses (6) and (7) to reach the deflated tire. valve stem and keep the TIREFIT kit flat on the ground. 4. Remove the cap from the valve stem and then screw This will provide the best positioning of the kit when the fitting at the end of the Sealant Hose (6) onto the injecting the sealant into the deflated tire and running the valve stem. air pump. Move the vehicle as necessary to place the valve stem in this position before proceeding. 5. Uncoil the Power Plug (8) and insert the plug into the vehicle's 12 Volt power outlet. 3. Place the transmission in PARK (auto transmission) or in Gear (manual transmission) and turn Off the ignition. NOTE: Do not remove foreign objects (e.g., screws or nails) from the tire. 4. Set the parking brake.