2013 Dodge Dart Owner Manual - Page 215

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 To activate the delay feature, place the ignition in the OFF position while the headlights are still on. Then, turn off the headlights within 45 seconds. The delay interval begins when the headlight switch is turned off. SmartBeam™ - If Equipped The SmartBeam™ system provides increased forward lighting at night by automating high beam control through the use of a digital camera mounted on the inside rearview mirror. This camera detects vehicle speIf you turn the headlights or parking lights on, or place cific light and automatically switches from high beams to the ignition in ACC or RUN, the system will cancel the low beams until the approaching vehicle is out of view. delay. If the windshield or SmartBeam™ mirror is replaced, the If you turn the headlights off before the ignition, they will SmartBeam™ mirror must be re-aimed to ensure proper turn off in the normal manner. performance. See your local authorized dealer. NOTE: To Activate • The lights must be turned off within 45 seconds of placing the ignition in the OFF position to activate this 1. Turn the headlight switch to the AUTO headlight position. feature. • The headlight delay time is programmable using the 2. Push the multifunction lever away from you (toward Uconnect௡ System, refer to "Uconnect௡ Settings" in front of vehicle) to engage the high beam mode. "Understanding Your Instrument Panel" for further NOTE: This system will not activate until the vehicle is information. at or above 20 mph (32 km/h). 3