2013 Dodge Dart Owner Manual - Page 296

294 UNDERSTANDING YOUR INSTRUMENT PANEL 26. Malfunction Indicator Light (MIL) 25. Anti-Lock Brake (ABS) Light This light monitors the Anti-Lock Brake System The Malfunction Indicator Light (MIL) is part of an onboard diagnostic system, called OBD, that (ABS). The light will turn on when the ignition monitors engine and automatic transmission conswitch is turned to the ON/RUN position and trol systems. The light will illuminate when the key is in may stay on for as long as four seconds. the ON/RUN position, before engine start. If the bulb If the ABS light remains on or turns on while driving, it does not come on when turning the key from OFF to indicates that the Anti-Lock portion of the brake system ON/RUN, have the condition checked promptly. is not functioning and that service is required. However, the conventional brake system will continue to operate Certain conditions, such as poor fuel quality, etc., may normally if the BRAKE warning light is not on. illuminate the MIL after engine start. The vehicle should be serviced if the light stays on through several of your If the ABS light is on, the brake system should be serviced typical driving cycles. In most situations, the vehicle will as soon as possible to restore the benefits of Anti-Lock drive normally and will not require towing. brakes. If the ABS light does not turn on when the ignition switch is turned to the ON/RUN position, have the light inspected by an authorized dealer.