2015 Dodge Challenger Owner Manual SRT - Page 141

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 • To opt out of the Advanced Auto High-Beam Sensitiv- To Deactivate ity Control (default) and enter Reduced High-Beam 1. Pull the multifunction lever toward you (or rearward Sensitivity Control (not recommended), toggle highin car) to manually deactivate the system (normal beam lever 6 full on/off cycles within 10 seconds of operation of low beams). ignition ON. System will return to default setting upon 2. Push back on the multifunction lever once again to ignition off. reactivate the system. If the windshield or Automatic High Beam Headlamp Control mirror is replaced, the mirror must be re-aimed Headlight Time Delay to ensure proper performance. See your local authorized This feature provides the safety of headlight illumination dealer. for up to 90 seconds when leaving your vehicle in an To Activate unlit area. 1. Turn the headlight switch to the AUTO headlight To activate the delay feature, turn OFF the ignition switch while the headlights are still on. Then, turn off the position. headlights within 45 seconds. The delay interval begins 2. Push the multifunction lever away from you (toward when the headlight switch is turned off. front of vehicle) to engage the high beam mode. NOTE: The lights must be turned off within 45 seconds NOTE: This system will not activate until the vehicle is of turning the ignition OFF to activate this feature. at or above 15 mph (24 km/h). 3