2015 Dodge Challenger Owner Manual SRT - Page 313

UNDERSTANDING YOUR INSTRUMENT PANEL 311 10. Blower Control Blower control is used to regulate the amount of air forced through the climate system. There are seven blower speeds available. Adjusting the blower will cause automatic mode to switch to manual operation. The speeds can be selected using either the blower control knob on the faceplate or the buttons on the touchscreen as follows: Button On The Touchscreen Use the small blower icon to reduce the blower setting and the large blower icon to increase the blower setting. Blower can also be selected by pressing the blower bar area between the icons. 11. Modes The airflow distribution mode can be adjusted so air comes from the instrument panel outlets, floor outlets Blower Control Knob On The Faceplate and demist outlets. The Mode settings are as follows: The blower speed increases as you turn the blower • Panel Mode control knob clockwise from the lowest blower setting. Air comes from the outlets in the instrument The blower speed decreases as you turn the blower panel. Each of these outlets can be individucontrol knob counterclockwise. ally adjusted to direct the flow of air. The air vanes of the center outlets and outboard outlets can be moved up and down or side to side to regulate airflow direction. There is a shut off wheel located below the air vanes to shut off or adjust the amount of airflow from these outlets. 4