2015 Dodge Challenger Owner Manual SRT - Page 30

28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Enter Remote Start Mode Push and release the REMOTE START button on the RKE transmitter twice within five seconds. The vehicle doors will lock, the parking lights will flash and horn will chirp twice (if programmed). Then, the engine will start and the vehicle To Exit Remote Start Mode Without Driving The will remain in the Remote Start mode for a 15-minute Vehicle cycle. Push and release the REMOTE START button one time or allow the engine to run for the entire 15-minute cycle. NOTE: • The engine can be started two consecutive times with the RKE transmitter. However, the ignition must be cycled by pushing the START/STOP button twice (or the ignition switch must be cycled to the ON/RUN position) before you can repeat the start sequence for a third cycle. • If an engine fault is present the vehicle will start and NOTE: To avoid unintentional shut downs, the system will disable the one time push of the REMOTE START then shut down 10 seconds later. button for two seconds after receiving a valid Remote • The park lamps will turn on and remain on during Start request. Remote Start mode. To Exit Remote Start Mode And Drive The Vehicle • For security, power window and power sunroof operation (if equipped) are disabled when the vehicle is Before the end of 15 minute cycle, push and release the UNLOCK button on the RKE transmitter to unlock the in the Remote Start mode.