2015 Dodge Challenger Owner Manual SRT - Page 52

50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE stowed position. If necessary, slide the latch plate 4. Continue to slide the latch plate up until it clears the folded webbing and the seat belt is no longer twisted. down the webbing to allow the seat belt to retract fully. Seat Belt Extender Lap/Shoulder Belt Untwisting Procedure If a seat belt is not long enough to fit properly, even when Use the following procedure to untwist a twisted lap/ the webbing is fully extended and the adjustable upper shoulder belt. shoulder belt anchorage (if equipped) is in its lowest position, your authorized dealer can provide you with a 1. Position the latch plate as close as possible to the Seat Belt Extender. The Seat Belt Extender should be used anchor point. only if the existing seat belt is not long enough. When the 2. At about 6 to 12 inches (15 to 30 cm) above the latch Seat Belt Extender is not required for a different occuplate, grasp and twist the seat belt webbing 180° to pant, it must be removed. create a fold that begins immediately above the latch plate. 3. Slide the latch plate upward over the folded webbing. The folded webbing must enter the slot at the top of the latch plate.