2015 Dodge Challenger Owner Manual SRT - Page 490

488 MAINTAINING YOUR VEHICLE Windshield Wiper Blades Clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild nonabrasive cleaner. This will remove accumulations of salt or road film. Adding Washer Fluid The windshield washer fluid reservoir is located in the front of the engine compartment. Be sure to check the fluid level in the reservoir at regular intervals. Fill the reservoir with windshield washer solvent (not radiator antifreeze) and operate the system for a few seconds to Operation of the wipers on dry glass for long periods flush out the residual water. may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt When refilling the washer fluid reservoir, apply some from a dry windshield. washer fluid to a cloth or towel and wipe the wiper blades clean. This will help blade performance. Avoid using the wiper blades to remove frost or ice from the windshield. Keep the blade rubber out of contact with To prevent freeze-up of your windshield washer system petroleum products such as engine oil, gasoline, etc. in cold weather, select a solution or mixture that meets or exceeds the temperature range of your climate. This NOTE: Life expectancy of wiper blades varies dependrating information can be found on most washer fluid ing on geographical area and frequency of use. Poor containers. performance of blades may be present with chattering, marks, water lines or wet spots. If any of these conditions are present, clean the wiper blades or replace as necessary.