2015 Dodge Challenger Owner Manual SRT - Page 373

STARTING AND OPERATING 371 Automatic Transmission - If Equipped 5. Make sure the steering wheel is pointing straight. Launch Control is only available when the following 6. Hold the brake and make sure the vehicle is in procedure is followed: "Drive". 1. Push the LAUNCH button on the center stack switch 7. While holding the brake, rapidly apply the accelerator bank. pedal to wide open throttle. The engine speed will hold at the RPM that was set in the "Launch RPM NOTE: Pushing the SRT button on the center stack or Set-up" screen. pressing the "SRT & Apps" button on the touchscreen are two other options to access launch control features. NOTE: Messages will appear in the Driver Information Please refer to "Uconnect® Settings" within your Own- Display (DID) to inform the driver if one or more of the er's Manual on the DVD for further information. above conditions have not been met. 5 2. Press the "Launch RPM Set-Up" button on the touch- 8. When conditions 5 through 8 have been met, the screen. This screen will allow you to adjust your Driver Information Display (DID) will read "Launch launch RPM's for optimum launch/traction. Ready Release Brake". 3. Press the "Activate Launch Mode" button on the 9. Keep the vehicle pointed straight. touchscreen. 4. Make sure the vehicle is not moving.