2015 Dodge Challenger Owner Manual SRT - Page 259

UNDERSTANDING YOUR INSTRUMENT PANEL 257 arrow button on the touchscreen. Refer to "ParkSense®" in your blind spot. The Blind Spot Alert feature can be in "Understanding The Features Of Your Vehicle" for activated in "Lights" mode. When this mode is selected, system function and operating information. the Blind Spot Monitor (BSM) system is activated and will only show a visual alert in the exterior mirrors. • Rear ParkSense® Chime Volume When "Lights & Chime" mode is activated, the Blind The Rear ParkSense® Chime Volume settings can be Spot Monitor (BSM) will show a visual alert in the selected from the DID or Uconnect® System - if exterior mirrors as well as an audible alert when the turn equipped. The chime volume settings include LOW, signal is on. When "Off" is selected, the Blind Spot MEDIUM, and HIGH. The factory default volume setting Monitor (BSM) system is deactivated. To change the is MEDIUM. To make your selection, press the Blind Spot Alert status, press the "Off," "Lights" or "ParkSense® Rear Chime Volume" button on the touch- "Lights & Chime" button on the touchscreen. Then press screen, until a check-mark appears next to setting, indi- the back arrow button on the touchscreen. cating that the setting had been selected. Press the back arrow button on the touchscreen to return to the previous NOTE: If your vehicle has experienced any damage in the area where the sensor is located, even if the fascia is menu. ParkSense® will retain its last known configuranot damaged, the sensor may have become misaligned. tion state through ignition cycles. Take your vehicle to an authorized dealer to verify sensor • Blind Spot Alert alignment. Having a sensor that is misaligned will result When this feature is selected, the Blind Spot Alert feature in the BSM not operating to specification. Provides alerts, visual and/or audible, to indicate objects 4