2015 Dodge Challenger Owner Manual SRT - Page 346

344 STARTING AND OPERATING 2. The ignition switch will return to the OFF position. 3. Place the shift lever in first gear or REVERSE and then apply the parking brake. NOTE: switch position will remain in the ACC position until the vehicle is stopped and the button is pressed twice to the OFF position. Keyless Enter-N-Go™ Functions - With Driver's Foot OFF The Brake Pedal/Clutch Pedal (In PARK • If the ignition switch is left in the ACC position, the Or NEUTRAL Position) system will automatically time out after 30 minutes of The Keyless Enter-N-Go™ feature operates similar to an inactivity and the ignition will switch to the OFF ignition switch. It has three positions, OFF, ACC and position. RUN. To change the ignition switch positions without • If the ignition switch is left in the RUN position, the system will automatically time out after 30 minutes of inactivity if the vehicle speed is 0 mph (0 km/h) and the engine is not running. starting the vehicle and use the accessories follow these steps starting with the ignition switch in the OFF position: 1. Press the ENGINE START/STOP button once to change the ignition switch to the ACC position, • If the vehicle speed is above 5 mph (8 km/h), the ENGINE START/STOP button must be held for two 2. Press the ENGINE START/STOP button a second time seconds before the engine will shut off. The ignition to change the ignition switch to the RUN position,