2000 Ford Windstar Owner Guide 1st Printing - Page 105

Controls and features To install floor mats that have a screw in retainer: 1. Move the driver's seat to the most rearward position 2. Position the driver's side floor mat with the rear of the mat against left (outboard) front edge of seat track mounting bracket. 3. Use a screwdriver to screw locator post into vehicle carpeting. Exert pressure while turning to pierce the carpeting. When installed properly, the locator will not screw down tightly, but will rotate freely. Use only Ford original Equipment floor mats. Do not stack multiple floor mats over the Ford original equipment floor mats as they are not positively retained. REMOTE ENTRY SYSTEM The remote entry system allows you to: • lock or unlock all vehicle doors and liftgate without a key. • unlock/open a RH power sliding door and/or LH power sliding door (if equipped). • activate the personal alarm. • arm and disarm the perimeter anti-theft system (if equipped). The lock/unlock and power sliding door features will operate with the vehicle in P (Park) or N (Neutral) and the ignition in the OFF, ACC or RUN positions. The panic control feature only operates with the ignition in the OFF position. If there is any potential remote keyless entry problem with your vehicle, ensure ALL key fobs (remote entry transmitters) are brought to the dealership, to aid in troubleshooting. 105