2000 Ford Windstar Owner Guide 1st Printing - Page 113

Controls and features Reprogramming transmitters To reprogram the transmitters yourself, place the key in the ignition and turn from OFF to ON eight times in rapid succession (within 10 seconds) ending in the ON position. After doors lock/unlock, press any control on all transmitters (up to four). With each control press of the transmitters, the door should cycle (lock/unlock) to confirm programming. When completed, turn the ignition to OFF. The door locks should cycle (lock/unlock) one last time to confirm completion of programming. Autolock This feature automatically locks all doors when: • all vehicle doors are closed • the ignition is in the ON/START position • you shift into or through R (Reverse) Relock The autolock feature repeats when: • the ignition is in the ON/START position • the vehicle speed is below 5 km/h (3 mph) and any door is opened then closed • the vehicle speed exceeds 5 km/h (3 mph) Deactivating/activating the autolock feature The autolock/relock feature can be turned off by your dealer. Deactivating/activating the illuminated exit feature The illuminated exit feature can be turned off by your dealer. PERIMETER ALARM SYSTEM (IF EQUIPPED) The perimeter anti-theft system will help prevent your vehicle from unauthorized entry. If there is any potential perimeter anti-theft problem with your vehicle, ensure ALL key fobs (remote entry transmitters) are brought to the dealership, to aid in troubleshooting. Arming the system When armed, this system will help protect your vehicle from unauthorized entry. When unauthorized entry occurs, the system will flash the turn signal lamps and side repeaters and honk the horn. 113