2000 Ford Windstar Owner Guide 1st Printing - Page 24
2000 Ford Windstar Manual
Page 24 highlights
Instrumentation 5. Press and hold the RESET control until the message center display changes to show the current zone setting. 6. Release the reset control, then slowly press down again. 7. Press the SETUP control repeatedly until the correct zone setting for your geographic location is displayed on the message center. To exit the zone setting mode press and release the RESET control. 8. Press the RESET control to start the compass calibration function. 9. Slowly drive the vehicle in a circle (less than 5 km/h [3 mph]) until the CIRCLE SLOWLY TO CALIBRATE indicator changes to CALIBRATION COMPLETED. This will take up to three circles to complete calibration. 10. The compass is now calibrated. FUEL ECON AVG Select this function from the INFO menu to display your average fuel economy in liters/100 km or miles/gallon. If you calculate your average fuel economy by dividing liters of fuel used by 100 kilometers traveled (miles traveled by gallons used), your figure may be different than displayed for the following reasons: • your vehicle was not perfectly level during fill-up • differences in the automatic shut-off points on the fuel pumps at service stations • variations in top-off procedure from one fill-up to another • rounding of the displayed values to the nearest 0.1 liter (gallon) 24