2000 Ford Windstar Owner Guide 1st Printing - Page 25

Instrumentation 1. Drive the vehicle at least 8 km (5 miles) with the speed control system engaged to display a stabilized average. 2. Record the highway fuel economy for future reference. It is important to press the RESET control after setting the speed control to get accurate highway fuel economy readings. DIST TO EMPTY (DTE) Selecting this function from the INFO menu will give you an estimate of how far you can drive with the fuel remaining in your tank under normal driving conditions. Remember to turn the ignition OFF when refueling your vehicle. Otherwise, the display will not show the addition of fuel for a few kilometers (miles). The DTE function will display LOW FUEL LEVEL and sound a tone for 1 second when you have low fuel level indicated on the fuel gauge. TRIP ELAPSED DRIVE TIME Select this function from the INFO menu to display your trip elapsed drive time and will display and accumulate when the key is in the RUN position. 1. Press the INFO control until the message center display shows the TRIP ELAPSED TIME XXXX. 2. Hold the RESET control down for two seconds to clear display. DISPLAY ON/OFF Select this function from the INFO menu to turn your message center display OFF or ON. 25