2010 Ford Explorer Owner Guide 2nd Printing (Spanish) - Page 754

Driving Shifting between 4X4 AUTO (4WD Auto) and 4X4 HIGH (4WD High) • Select 4X4 AUTO (4WD Auto) or 4X4 HIGH (4WD High) at any forward speed. Note: Do not perform this operation if the rear wheels are slipping. Shifting to/from 4X4 LOW (4WD Low) 1. Bring the vehicle to a complete stop 2. Place the transmission in N (Neutral). 3. Press the desired 4WD position. • If shifting into 4x4 LOW (4WD Low), wait for the 4X4 LOW light in the instrument cluster to turn on indicating the shift is complete. • If shifting out of 4X4 LOW (4WD Low), wait for the 4X4 LOW light in the instrument cluster to turn off indicating the shift is complete. If any of the above shift conditions are not met, the shift will not occur and the message center will display the appropriate information. ALL WHEEL DRIVE (AWD) SYSTEM (IF EQUIPPED) For the lubricant specification and refill capacity of the AWD transfer case refer to Maintenance and Specifications chapter. WARNING: If your vehicle is equipped with AWD, a spare tire of a different size than the road tires should never be used. Such a tire could make the vehicle difficult to control as well as result in damage to driveline components. WARNING: Utility and four-wheel drive vehicles are not designed for cornering at speeds as high as passenger cars any more than low-slung sports cars are designed to perform satisfactorily under off-road conditions. Avoid sharp turns or abrupt maneuvers in these vehicles. Normal operation (4.0L engine vehicles only) The AWD system is always active and requires no driver input. It is capable of handling all road conditions, including street and highway driving as well as off-road conditions such as deep snow, ice or shallow sand. 298 2010 Explorer (exp) Owners Guide, 2nd Printing USA (fus)