2010 Infiniti EX35 Owner's Manual - Page 160

AUTOMATIC DRIVE POSITIONER (if so equipped) The automatic drive positioner system has three features: ● Entry/exit function ● Seat synchronization function ● Memory storage The driver's seat will not return to the previous positions if the seat or steering adjusting switch is operated when the seat is at the exit position. Initialize entry/exit function If the battery cable is disconnected, or if the fuse opens, the entry/exit function will not work though this function was set on before. In such a case, after connecting the battery or replacing with a new fuse, open and close the driver's door more than two times after the ignition switch is turned from the ON position to the LOCK position. The entry/exit function will be activated. Cancel or activate entry/exit function The selector lever must be in the P (Park) position with the ignition switch in the OFF position. The entry/exit function can be activated or canceled by pressing and holding the SET switch for more than 10 seconds. The indicator lights on the memory switches (1 and 2) will blink once when the function is canceled, and the indicator lights will blink twice when the function is activated. The entry/exit function can also be activated or canceled if the "Lift Steering Wheel on Exit" key or "Slide Driver Seat Back on Exit" key is turned to ON or OFF in the "Comfort & Conv." settings. (See "VEHICLE INFORMATION AND SETTINGS" in the "4. Monitor, climate, audio, phone and voice recognition systems" section.) ENTRY/EXIT FUNCTION This system is designed so that the driver's seat and steering column will automatically move when the automatic transmission selector lever is in the P (Park) position. This allows the driver to get into and out of the driver's seat more easily. The driver's seat will slide backward and the steering wheel will move up when the driver's door is opened with the ignition switch in the OFF position. The driver's seat and steering wheel will return to the previous positions when one of the following is operated: ● When the ignition switch is pushed to the ACC position after the driver's door is closed. ● When the ignition switch is pushed to the ON position. ● When the Intelligent Key is inserted into the port after the driver's door is closed. Pre-driving checks and adjustments 3-25